Domestic Hot Water Systems

//Domestic Hot Water Systems
Domestic Hot Water Systems 2017-03-22T08:32:37+00:00

Tankless water heaters, also known as demand-type or instantaneous water heaters, provide hot water only as it is needed. They don’t produce the standby energy losses associated with storage water heaters, which can save you money.

Tankless water heaters heat water directly without the use of a storage tank. When a hot water tap is turned on, cold water travels through a pipe into the unit. Either a gas burner or an electric element heats the water. As a result, tankless water heaters deliver a constant supply of hot water. You don’t need to wait for a storage tank to fill up with enough hot water.

Features field convertible gas system, ultra condensing efficiency and dual stainless steel heat exchangers.  Low NOx emissions under 20ppm.  SCH 40, 2″ venting up to 60′.  Cascading capable.

Our iQ Series floor-standing units, iQ1501, iQ1001, and iQ751 deliver the ultimate in on-demand water-heating capacity. iQ1501 is Intellihot’s most powerful model and gives new meaning to “smart water.”

Count on superior performance and reliability with our iQ251 wall-hung on-demand water heater. Designed to be our commercial “workhorses,” these units deliver 251,000 BTUs/hr and are ideal for highly variable applications using potable hot water.

If you’re looking for a highly efficient water heating solution that costs less than 60¢ per day to operate and is packed with modern features, we recommend a Rheem Hybrid Electric water heater.

Professional Prestige Series: Powered Damper Ultra Low NOx .67 EF ENERGY STAR® rated
EcoNet™ enabled for integration with home automation, energy management and demand response systems 40 and 50 gallon capacities

Professional Prestige™ electric water heaters offer a diagnostic system with leak protection and a 12-year warranty. Save up to $107+ in yearly energy costs using Rheem’s Electric Water Heaters with the EcoNet™ Wi-Fi module—controlling it from anywhere with Internet access.

Low Profile height available for small spaces. High out put options & large pipe connections available on selected models. Easy installation with top connections. Durable high grade 316L stainless steel. Fail proof, welded stainless steel dip tube. Full 2″ plus of insulation for an extremely low heat loss. A Thermoplastic jacket that will not corrode or dent. Two extra dip tube installed to circulate to and ram the heat source. Quality brass drain and T+P valves are factory Installed. Conforms to UL STD 174, Certified to CAN/CSA STD 022.2 No. 110-94.  Limited lifetime residential warranty

High performance domestic hot water. Constructed of 444 grade stainless steel, pickled & passivated for the highest possible resistance to corrosion. High capacity smooth wall stainless steel coil. Maintenance free design. Available in 7 sizes: 30, 40, 55, 65, 80, 80-MAX & 119-MAX. Light weight for easy installation. 2” of polystyrene foam insulation for an extremely low standby heat loss. Removable inspection port for easy access to coil and tank. Standard Aquastat & 10KΩ temperature sensor.

Combining Domestic Hot Water & Space Heating in a single compact design! Up to 94% AFUE with full ASME rated vessel. Built in Boiler Pump. Includes Air Vent, Outdoor Sensor & Relief Valve. The dual two in one, back to back heat exchanger eliminates the need for a diverter valve and secondary domestic hot water plate heat exchanger. Contractor friendly, fewer internal parts, easy to install, maintain and service. Reset heating – Set point – DHW. Outdoor Reset Technology increases efficiency by lowering the water temp automatically. 10 year limited warranty. Unique “self learning” ECO-mode for greater DHW efficiencies.

The 5 Series represents some of our best features and efficiencies. Its advanced components offer a level of comfort and savings that’s far greater than any ordinary system and among the geothermal industry’s highest.

The Envision Series NDW is designed to meet the high-volume water demands of today’s larger luxury homes. NDW units provide high capacity heating and cooling performance, but still deliver the features homeowners have come to expect from our Envision line.

With the Synergy3D Series, you’ll enjoy incredible energy savings on your heating and cooling costs while providing hot water for radiant floor heat (domestic hot water option also available). The Synergy3D is the geothermal equivalent of a boiler, furnace and air conditioner – all in a single unit.

We have been very impressed with all aspects [of the job] - explainations, installation and follow-up! Excellent workmanship - very good program! The installation team cleaned up at the end of the day. Excellent job - outstanding workmanship.

- Shirlene & Robert A. - Olympia, WA